The following download will install the Monnit™ USB Pro Gateway application on your computer. This application is the communication bridge between your USB Pro gateway and the iMonnit monitoring software, which can be online, local to your PC* or on your companies own server. Note: The Monnit Gateway application needs to be running on your computer in order for the sensor data to be transmitted to the online system. If the gateway is not running your sensor data is not being recorded and notifications based on sensor data cannot be sent from the system.
*Windows 10 or higher is required to run the Monnit Gateway.
Monnit™ USB Pro Gateway Application Service and Status Installer
The following download will install the iMonnit Express™ application on your computer. This application requires an Activation Key available for purchase here. iMonnit Express allows you to manage and configure your sensor network (gateways and sensors) on a local PC without the need for an Internet connection to operate. You can track sensor readings and configure notifications by email if an Internet connection is available to the PC.
The following download will install the iMonnit Enterprise™ application on your server. This application requires an Activation Key available for purchase here. iMonnit Enterprise is available for large organizations with specific data/usage requirements. It provides the same feature set as the iMonnit Premiere online software but allows the organization to host and maintain their own sensor data.
Minimum System RequirementsThe following download will install the Monnit Wi-Fi Sensor programming utility on your computer. This application is needed in order to program your Monnit Wi-Fi (MoWi) sensors with Wi-Fi network security information if using WEP, WPA or WPA2 standards.
The following download is the MIB file for use configuring SNMP software to communicate with Monnit Ethernet Gateway. This file contains the mapping of the sensor data in the gateway.
The following download will install the Monnit Serial Modbus Gateway programming application on your computer. This application can be used to edit the gateways settings.
Monnit Serial Modbus Gateway Configuration Utility Ver. 3.2
(For product shipped after June 1, 2018)
The following download is the MIB file for use configuring SNMP software to communicate with PoE•X Sensors. This file contains the mapping of the sensor data.